| SPECIFICATION |
UNIT |
horizontal machine center |
| CAPACITY |
MAX WORKPIECE DIAMETER |
mm |
ɸ1450 |
| MAX. WORKPIECE HEIGHT |
mm |
1450 |
| X-AXIS STROKE |
mm |
1400 |
| Y-AXIS STROKE |
mm |
1200 |
| Z-AXIS STROKE |
mm |
1275 |
| DISTANCE FROM SPINDLE NOSE TO CENTER OF PALLET |
mm |
150-1425 |
| DISTANCE FROM CENTER OF SPINDLE TO TOP SURFACE OF PALLET |
mm |
100-1300 |
| PALLET LOAD (EVENLY LOADED) |
Kg |
2000 |
| GUIDWAY (X, Y,Z) |
|
LINEAR MOTION BEARING |
| X-AXIS BALL SCREW DIA. |
mm |
ɸ50 |
| X-AXIS BALL SCREW LEAD |
mm |
20 |
| Y-AXIS BALL SCREW DIA. |
mm |
ɸ50 |
| Y-AXIS BALL SCREW LEAD |
mm |
20 |
| Z-AXIS BALL SCREW DIA. |
mm |
ɸ50 |
| Z-AXIS BALL SCREW LEAD |
mm |
20 |
| |
| SPINDLE |
SPINDLE NOSE TYPE |
Type |
BBT-50 |
| SPINDLE SPEED |
rpm |
35 TO 8000 |
| I.D OF SPINDLE BEARING |
mm |
120 |
| MAIN MOTOR-30MIN / CONTINUOUS RATING |
Kw |
37 / 30 |
| TOOL CLAMPING TYPE |
Type |
CONE DISC SPRING |
| TOOL CLAMPING FORCE |
KN |
20.6 |
| TOOL UNCLAMPING TYPE |
Type |
HYDRAULIC PISTON |
| CLEANING A TAPER HOLE |
Method |
THROUGH SPINDLE-ATC AIR BLOWER IS INTEGRATED |
| SPINDLE BEARING NOS |
No. |
5 |
| SPINDLE TORQUE |
Nm |
1215 |
| DUAL COOLING FOR SPINDLE |
– |
YES. AVAILABLE |
| |
| FEEDRATE |
RAPID TRAVERSE RATE |
mm/min |
60000 |
| CUTTING FEED RATE |
mm/min |
60000 |
| |
| TABLE AND PALLET |
PALLET WORKING AREA |
mm |
1000 X 1000 |
| PALLET TOP SURFACE-TAP SIZE |
Size |
M20 X P2.5 |
| PITCH X NO. OF TAPPED HOLES |
mm |
100 X 81 |
| PALLET CHANGE TIME |
Sec |
14 |
| PALLET TOP SURFACE HEIGHT FROM FLOOR LEVEL |
mm |
1350 |
| |
| OPTION-NC POSITIONING TABLE |
TABLE INDEXING |
– |
0.001° X 360000 (Positioning Table) |
| TABLE INDEXING TIME |
Sec |
2.2 s / 90° |
| |
| AUTOMATIC TOOL CHANGER |
TOOL STORAGE CAPACITY |
No. |
60 |
| TOOL SELECTION METHOD |
Method |
RANDOM SELECTION (60 TOOLS MAGAZINE) |
| TOOL SHANK TYPE |
Type |
BBT-50 |
| MAX TOOL LENGTH |
mm |
630 |
| MAX MASS OF TOOL |
Kg |
30 |
| TOOL CHANGING TIME-CHIP TO CHIP |
Sec |
5.4 (MASS OF TOOL 15 KG – 30 KG) |
| MAX. DIAMTER OF TOOL IN THE MAGAZINE-60 TOOLS |
NO CONDITION |
mm |
ɸ125 |
| WITHOUT ADJACENT TOOL |
mm |
ɸ250 |
| WITHOUT ADJACENT TOOL AND WITH TOOLS OF DIA.+/-240 MM OR SMALLER IN THE POCKET NEXT TO THE ADJACENT POCKET |
mm |
ɸ260 |
